Spec.

High performance Dust-less type, Constant Temperature Oven

200ºC

NAME	Clean Oven 200ºC type
MODEL	CLN-21DPA	CLN-22DPA	CLN-23DPA
	Dustless type hot air circulating oven
POWER SUPPLY	3φ AC200V±10％ 50/60Hz
POWER REQUIRED	5.1KVA	7.3KVA	10.7KVA
CONTROL SYSTEM	Hot air circulating system
OPERATING CONDITIONS	Ambient: 0.0～35.0ºC,　20～80％RH
PERFORMANCE
Temperature range	50.0～200.0ºC
Stability	±0.5ºC
Uniformity	±1.0 ％
Temperature rise time	RT→200.0ºC within 60 min.
Cleanness	The American Federal Standards 209b Class 100
Highest temperature	200.0ºC
CONFIGURATION
Internal material	SUS-304 stainless steel plate
External material	Cold-rolled steel plate, Painting finished
Insulating material	Rock wool
HEATER	Sheath heater
HEATER OUT PUT (kW)	4.0	6.0	9.0
BLOWER FAN	Air foil fan
FAN MOTOR (kW)	0.4	0.75	1.0
FILTER	Heart-resistant HEPA filter
OVERHEAT PREVENTION UNIT	Electronic temperature controller
ACESSORIES	Inert gases injection valve, Free settable shelf with supporting pipes ×2 sets,
SAFETY UNITS	Leak breaker, Fan motor overload relay, Overheat prevention unit (Electronic temperature controller
OPTIONS	Air blowing speed reinforcement, Exhaust blower for high-speed temperature up and down, SUS exterior, Gas flowing meter, Caster, Adjuster, Manometer, Additional step for DP instrumentation, Interface RS-232C/GP-IB,
INTERNAL CAPACITY (litter)	205.2	432	864
INTERNAL DIMENSIONS:W×H×Dmm	600× 600× 570	600× 900× 800	900×1200× 800
EXTERNAL DIMENSIONS:W×H×Dmm	1080×1530×1150	1080×1830×1380	1380×2100×1395
WEIGHT (kg)	320	350	450

*Concerning the temperature uniformity performance, according to the Standard for the Performance of High temperature Chambers (JTM K-05) of Testing Machinery Association of Japan, the classes are organized according to a measured numerical value which is indicated by the distance from each of the wall surface to a relative wall surface that excludes 1/6 of the space.

*The temperature rising performance is at an ambient temperature of 20ºC, when the chamber is in an unloaded condition.

*The above specifications may be changed for any improvement of product without giving any preliminary notification.

*The external depth dimension is 200mm bigger than above dimensions in case of Air blowing speed reinforcement type.