Slope control possible !

This latest, most advanced step programming instrumentation also allows slope control. In the photograph at left, the slope control is set to achieve 60°C, within 2 hours and 30 minutes during the first program step from room temperature.

Possible to increase the number of steps at any time !

The number of program steps in the DP instrumentation can be extended at any time and up to any number according to the use's needs. The standard specification equipment is equipped with 2 steps. However, as long as sufficient mounting space is available, it is possible to increase the number of steps simply by adding the optional step extending unit.

Provided with a wait function that gives exact step times !

Step time measurement starts after the current temperature enters a temperature zone that is within ±3°C of the set step temperature.